Rack protection
Column guards, end-of-aisle barriers, guide rails and bollards specified to the traffic around each run.
Home / Products & Solutions
Products & Solutions
Four core families of industrial storage, each configured to the building and the operation rather than to a fixed catalogue. Every system below can be specified in standard form or adapted — heights, depths, bay widths, finishes and load ratings are set at design stage.
Downloadable guide
Download PDF · 311 KB
Product & Solutions Guide
All four systems, a configuration comparison and what we need from you to quote — one 13-page PDF you can forward internally, no form required.
Bulk storage
01 · Pallet Racking
Pallet Racking Systems
The workhorse of palletised storage. Adjustable beam levels let you change the configuration as your stock profile changes, with direct access to every pallet position where selectivity matters most.
We specify the configuration around your throughput and SKU count: fully selective where picking speed dominates, higher-density formats where floor area is the constraint. Frame heights, beam lengths and level spacings are set from the survey.
Configurations available
- Selective racking — 100% pallet access, the default for mixed, fast-moving stock.
- Double-deep — higher density where SKUs run to two or more pallets.
- Drive-in / drive-through — maximum density for low-SKU, high-volume storage.
- Push-back and pallet live — density with FIFO or LIFO rotation built in.
- Very narrow aisle (VNA) — height and density combined, for guided truck operations.
- Typical frame height2,000 – 12,000 mm
- Beam load capacity1,000 – 4,500 kg per level
- Standard finishPowder-coated / galvanised
- AccessoriesMesh decks, pallet supports, column guards, safety mesh
Hand-loaded
02 · Shelving Systems
Shelving Systems
For stock that is picked by hand rather than by forklift: spares, cartons, small parts, archive and e-commerce pick faces. Boltless assembly means levels can be re-pitched in minutes as the stock profile changes.
Shelving is often where the quickest capacity gains sit. Correct level pitching, the right shelf depth and a sensible pick-face height can lift storage density substantially without touching the building.
Configurations available
- Boltless shelving — fast assembly and reconfiguration for general storage.
- Long-span shelving — wider bays for bulky, hand-loaded items.
- Multi-tier systems — shelving stacked into two or three walkable levels.
- Small parts & bin storage — drawer units, louvre panels and bin fronts.
- Archive & document storage — depth and pitch set for box sizes.
- Typical bay width900 – 2,400 mm
- Shelf load capacity100 – 800 kg per level (UDL)
- Shelf materialsSteel panel, chipboard, mesh
- AccessoriesDividers, back and side panels, label strips, bins
Floor area
03 · Mezzanine Floors
Mezzanine Floors
The cheapest square metre is usually the one already inside your building. A structural mezzanine converts unused headroom into a second working level — storage, picking, packing or offices — without extending the footprint or triggering a relocation.
Each mezzanine is engineered to the loading it will carry and the column grid the building allows, with staircases, handrails, edge protection and pallet gates designed in from the start rather than added later.
Typical applications
- Storage mezzanines — additional pallet or shelving area above the ground floor.
- Pick and pack platforms — dedicated levels for order assembly and despatch.
- Office and welfare decks — enclosed space over operational floor area.
- Production support floors — line-side storage and equipment platforms.
- Typical floor loading350 – 1,000 kg/m² (UDL)
- Clear height underSet to suit MHE and building
- Decking optionsChipboard, steel, mesh, anti-slip
- IncludedStaircases, handrail, kick plate, pallet gates
Purpose-built
04 · Custom Storage
Custom Storage Solutions
Not every load fits on a pallet. Long goods, heavy dies, reels, tyres and irregular assemblies need systems designed around the item itself — and this is where the integrator model earns its keep.
We start from the load: its weight, dimensions, handling method and rotation. From there we specify a system, engineer it with the right partner and install it. Existing racking can often be adapted rather than replaced, which is usually the cheaper answer.
Examples of custom work
- Cantilever racking — pipes, timber, steel sections, profiles and boards.
- Tyre and reel storage — cradles and supports shaped to the product.
- Mould and die racking — heavy-duty levels with lifting access.
- Cold store and clean-area systems — finishes and materials to suit the environment.
- Retrofits and reconfigurations — adapting installed racking to a changed stock profile.
- Design basisLoad-led, engineered per project
- Cantilever arm capacity200 – 2,000 kg per arm
- FinishesPowder coat, galvanised, food-grade options
- Lead timeConfirmed at design stage
Also supplied
Safety and ancillary equipment
The components that keep an installation compliant and protected in daily use.
Safety accessories
Anti-collapse mesh, pallet supports, back stops and load notices fitted as part of the installation.
Decking & panels
Mesh decks, steel panels and chipboard shelves to suit the load, the fire strategy and the handling method.
Signage & labelling
Location labelling, aisle and bay identification, and rack load-capacity signage for every configuration.
Not sure which system fits?
Send us your building dimensions, pallet type and stock profile. We will come back with a recommended configuration and a budget figure.